Ergonomically designed, compact, quiet, and powerful are just a few of the benefits available with this air drill. The short body length is ideal for working in tight areas while the light weight and perfect balance makes it the mechanic's favourite drill.

• 75 HP High Torque Motor
• Speed: 500rpm
• Capacity: 3/8"
• Length: 7.5"
• Includes chuck guard
• Variable speed teasing trigger
• Made in the USA

This 4 piece set includes one wrench of each size: 9/16", 1/2", 5/8", 3/4" Designed with a 1/2" square drive, these rugged hex head cylinder base wrenches are made to last. The hex heads are extra thin for easy access over the cylinder bolts

• For continental engines
• 12 point hex wrench end
• Made from alloy steel forgings
• Heat treated for maximum strength and toughness

• Model: 135AHD-12 (Speed: 12,000 rpm)
• Model: 135AHD-25 (Speed: 25,000 rpm)
• Collet size: 1/4"
• Length: 4 7/8"
• Angle head height: 2 29/32"
• Weight: 0.94 lb

• Capacity: 5/32" Aluminium; 1/8" Steel
• Bore: 1/2"
• Stroke: 3"
• Blows per minute: 2250
• Rivet set diameter: 0.401
• Length: 6-7/8"
• Weight: 2.8lbs
• Inlet: 1/4 NPT
• Unique Viscoelastic dampening system reduces damaging low-frequency vibration
• Ergonomically designed air rivet gun - comfortable, balanced air tool
• Compact design
• Reduced noise output
• Few moving parts create a durable, reliable air rivet gun
• TP1 swivel regulator supplied as standard equipment
• Precision machined, hardened and ground valve
• "Sure Grip" powder coated finish
• Teasing trigger
• Precision machined and hardened cylinder for long life
• CE Certified

• Capacity: 3/16" Aluminium; 5/32" Steel
• Bore: 1/2"
• Force: 6000lbs;
• Reach: 1 1/2"
• Gap: 7/8"
• Length: 12"
• Weight: 5lbs
• Inlet: 1/4 NPT
• Moving Jaw has been slightly modified, but will not effect reach or force
• Speed of squeeze riveter can be controlled by throttle
• Tandem cylinder doubles compression force available from tool
• Develops full squeezing froce with only 90psi air pressure
• One piece bearing fro long life
• Precision machined, hardened and ground valve
• "Sure Grip" powder coated finish
• Precision machined and hardened cylinder for long life
• CE Certified

This exceptional metal former is great for making smooth radius bends in sheet metal without cutting, heating, or hammering the material. Reproduce just about anything with a curved edge. Mount it on your workbench or in a vice. Use the shrinker to contract metal, to make inside curves and use the stretcher to expand the metal for outside curves. The hand operated press gives a 45:1 leverage, works metal up to 18 gauge mild steel, 20 gauge stainless, and 17 gauge aluminium. Specially hardened jaws are reversible for double life. The unit comes completely assembled and ready to use.

Includes shrinking and stretching jaws, for easy conversion.
Weight 13lb

• 1/4" - 28 Internal Thread
• Rear Exhaust
• Speed: 3500 rpm
• Weight: 1.5lbs / 0.68 kg
• Length: 10" / 254 mm

• Power: 0.75 HP
• Maximum TIR of .005" for precise, concentric holes is assured by the double row ball bearing construction
• Get the job done with less fatigue with the excellent power to weight ratio
• Slow starts and high speed drilling allowed with the variable speed controls
• Skinsulate housing for operator comfort and productivity
• Maintenance is simplified with cantilever-mounted planetary gears, which are accessible without need to press from the gear frame
• Chuck Capacity: 1/2"
• Free Speed: 900 RPM
• Stall Torque: 185 in/lb
• CFM -- 25
• Length: 8.75"
• Weight: 3.19 lb

Ergonomically designed, compact, quiet, and powerful are just a few of the benefits available with this die grinder.

• 0.33 HP Motor
• Speed: 20000rpm
• Capacity: 6mm;
• Length: 6"
• Rear Exhaust
• Built In Speed Control
• Made in the USA

• Model: TP583
• New Approach to centre punching accurate locations on templates, prototype parts etc
• Conveniant cross hair allignment assures positive location within less than .002"

• Capacity: 1/8" Universal & Countersunk Head (MS20426) Cherrylock Rivets
• Fits directly onto G784 Riveter
• Length: 6"

• Capacity: 5/32" Universal & Countersunk Head (MS20426) Cherrylock Rivets
• Fits directly onto G784 Riveter
• Length: 6"

• Capacity: 3/16" Universal & Countersunk Head (MS20426) Cherrylock Rivets
• Fits directly onto G784 Riveter
• Length: 6"

• Precision Machined
• Provides accurate rivet shank measurement of minimum to maximum.
• Nominal gauge slot for identification of rivet diameter
• Sizes in set , 3/32, 1/8, 5/32, 3/16 and 7/32

• 1/4" Hex Phillips
• set includes 25 off #1 and 25 off #2

• 1/4 hex #3 size
• Pack of 10 bits

• 1/4 hex #5 size
• Pack of 10 bits

• Standard Cut
• Deburrs Steel cast and ferrous metals
• Solid Carbide construction
• Shank size 1/4"
• SBurr Diameter 5/16"
• Length of Burr 5/8"
• Weight: lb